Good to know

You need to be E-File trained in order to use the E-File on a client.
Consult a GP before using the E-File if you or your client have diabetes or any other health conditions.
You can use the following procedures for any appropriate manicure treatment according to your preference.
The E-File must not be exposed to water in any way.
It is recommended to apply the E-File only to dry skin and a proper care must be taken to prevent any contact between water and the machine, its cords, or outlets.

Tools & Products

Tools	Products
1. E-File nail drill 2. E-File Bits	1. Sanitiser 2. Dusting Brush

Sanitise you hands and request the client to sanitise their hands.
Ensure the client’s skin and nails are completely dry.
Ensure that your chosen E-File bits are sanitised. Insert the bit into the handpiece and make sure the chuck is securely locked.
Set the machine to the appropriate direction based on your dominant hand: right-handed technicians should use the E-File in the forward/clockwise direction, while left-handed technicians should use it in the reverse/anti-clockwise direction.
Adjust your machine’s RPM to the appropriate speed for your E-File bit.
After using the E-File bit, unlock the chuck and set the bit aside for sanitisation.
Use a dusting brush to remove any excess cuticle or dead skin.
To prevent dust from accumulating in the E-File handpiece when not in use, insert the E-File safety and lock it in place.
Turn off and unplug the E-File when not in use.